1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
#
# This file is used for selecting non-standard netcard options, and
# need not be modified for typical use.
#
# Drivers are *not* selected in this file, but rather with files
# automatically generated during the top-level kernel configuration.
#
# Special options supported, indexed by their 'config' name:
#
# CONFIG_WD80x3 The Western Digital (SMC) WD80x3 driver
# WD_SHMEM=xxx Forces the address of the shared memory
# WD_no_mapout Don't map out the shared memory (faster, but
# your machine may not warm-boot).
# CONFIG_NE2000 The NE-[12]000 clone driver.
# PACKETBUF_MEMSIZE Allows an extra-large packet buffer to be
# used. Usually pointless under Linux.
# show_all_SAPROM Show the entire address PROM, not just the
# ethernet address, during boot.
# rw_bugfix Patch an obscure bug with a version of the 8390.
# CONFIG_HPLAN The HP-LAN driver (for 8390-based boards only).
# rw_bugfix Fix the same obscure bug.
# CONFIG_EL2 The 3c503 EtherLink II driver
# EL2_AUI Default to the AUI port instead of the BNC port
# no_probe_nonshared_memory Don't probe for programmed-I/O boards.
# EL2MEMTEST Test shared memory at boot-time.
# CONFIG_PLIP The Crynwr-protocol PL/IP driver
# INITIALTIMEOUTFACTOR Timing parameters.
# MAXTIMEOUTFACTOR
# D_LINK The D-Link DE-600 Portable Ethernet Adaptor.
# D_LINK_IO The D-Link I/O address (0x378 == typical)
# D_LINK_IRQ The D-Link IRQ number to use (IRQ7 == typical)
# D_LINK_DEBUG Enable or disable D-Link debugging
# DEPCA The DIGITAL series of AT Ethernet Cards (DE100, DE200)
# DEPCA_IRQ Set the desired IRQ (=0, for autoprobe)
# DEPCA_DEBUG Set the desired debug level
#
# The following options exist, but cannot be set in this file.
# lance.c
# LANCE_DMA Change the default DMA to other than DMA5.
# 8390.c
# NO_PINGPONG Disable ping-pong transmit buffers.
# Most drivers also have a *_DEBUG setting that may be adjusted.
# The 8390 drivers share the EI_DEBUG settting.
# General options for Space.c
OPTS = # -DETH0_ADDR=0x300 -DETH0_IRQ=11
WD_OPTS = #-DWD_SHMEM=0xDD000
EL2_OPTS = #-DEL2_AUI
NE_OPTS =
HP_OPTS =
PLIP_OPTS =
DEPCA_OPTS = -DDEPCA_IRQ=0 -DDEPCA_DEBUG=1
# The following are the only parameters that must be set in this file.
DL_OPTS = -DD_LINK_IO=0x378 -DD_LINK_IRQ=7 -UD_LINK_DEBUG